P tightening screw M4x Fixing lower roller Pressure roller, mm dia. It scans the photosensitive drum main scanning direction to create a latent static image. Photosensitive drum cleaner assembly 4 Is foreign matter e. If your skin or clothes have come into contact with toner, try removing as much of it as possible with dry paper tissues, and wash off with water.
|Date Added:||2 September 2011|
|File Size:||52.54 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
F 3 Remove the screw , and detach the stack eliminator .
For other charging assemblies, fit the lid 2 pc. Not counted; the machine is not equipped with fax functions.
F        . Use any of the above methods as needed. Check the image using PG4.
Canon iR Printers and MFPs specifications
The density of the original can have the following effects: Find Supplies and Accessories About Counterfeits. F F F      . Do not mount it until the solvent is fully dry. Fixing, displaced registration, soiled back Remarks Standards single-sided Leading edge: F    .
Canon Photocopier ImageRUNNER 105
Use lint-free paper to dry wipe, and use alcohol thereafter. That standard is ISO ppm. Not only the main controller PCB, but also the reader imageruner, printer unit, and control panel are all ready for communication and control. Be sure to disconnect the power plug from the power outlet. Store away the fixing, as you will need it to secure the scanner when relocating the machine. Replace the developing roll. A full turn of the screw changes the position of the charging wire by about 0.
F           . Start with A, and then B; if both fail, execute C. This manual covers all localities where the products are sold.
imageRUNNER – Support – Download drivers, software and manuals – Canon UK
Do not place the process unit or the photosensitive drum in an area exposed to direct rays of the sun. The Canon iR features superior halftones,robust collation and stapling that requires minimal operator intervention. F 4 Remove the E-ring , and remove the bearing  to detach the vertical path roller . Keep the harness clip  so that the side with a protrusion thicker side is at the bottom.
Some, however, may find its odor unpleasant as while remaining in contact with it for long hours. Make checks as instructed for checking the surface potential control system 2.
The presence of this sensor enables the shortest possible sheet-to-sheet distance.
Go to step 6. F F A   0. Carry the developing assembly in a separate box.
Acnon 3 Disconnect the connector , and remove the pre-transfer exposure LED . You will use the removed parts later. F    .